| Rotary servo motor model HK-KT | 053W | 13W | 1M3W | 13UW | 23W | 43W | 63W |
| Flange size [mm] | 40 × 40 | 60 × 60 |
| Continuous running duty 4 | Rated output [kW] | 0.05 | 0.1 | 0.15 | 0.1 | 0.2 | 0.4 | 0.6 |
| Rated torque 5 [N•m] | 0.16 | 0.32 | 0.48 | 0.32 | 0.64 | 1.3 | 1.9 |
| Maximum torque 3 [N•m] | 0.56 (0.72) | 1.1 (1.4) | 1.7 (2.1) | 1.1 (1.4) | 2.2 (2.9) | 4.5 (5.7) | 6.7 (8.6) |
| Rated speed 4 [r/min] | 3000 |
| Maximum speed 4 [r/min] | 6700 |
| Power rate at continuous rated torque | Standard [kW/s] | 6.4 | 14.8 | 23.3 | 8.4 | 19.4 | 39.5 | 61.0 |
| With electromagnetic brake [kW/s] | 5.8 | 14.0 | 22.4 | 6.6 | 16.0 | 36.7 | 58.0 |
| Rated current [A] | 1.3 | 1.2 | 1.2 | 1.1 | 1.4 | 2.6 | 4.5 |
| Maximum current 3 [A] | 4.6 (6.2) | 4.6 (6.0) | 4.5 (6.0) | 4.6 (6.0) | 5.4 (7.1) | 9.8 (14) | 19 (25) |
| Moment of inertia J | Standard [× 10 -4 kg•m²] | 0.0394 | 0.0686 | 0.0977 | 0.121 | 0.209 | 0.410 | 0.598 |
| With electromagnetic brake [× 10 -4 kg•m²] | 0.0434 | 0.0725 | 0.102 | 0.153 | 0.254 | 0.442 | 0.629 |
| Recommended load to motor inertia ratio 1 | 20 times or less 9 | 20 times or less | 10 times or less 9 | 23 times or less 8 | 23 times or less | 25 times or less |
| Speed/position detector | Batteryless absolute/incremental 26-bit encoder (resolution: 67,108,864 pulses/rev) |
| Oil seal | None (Servo motors with an oil seal are available. (HK-KT_J)) 6 |
| Electromagnetic brake | None (Servo motors with an electromagnetic brake are available. (HK-KT_B)) |
| Thermistor | None |
| Insulation class | 155 (F) |
| Structure | Totally enclosed, natural cooling (IP rating: IP67) 27 |
| Vibration resistance *1 | X: 49 m/s² Y: 49 m/s² |
| Vibration rank | V10 *3 |
| Permissible load for the shaft *2 | L [mm] | 25 | 30 |
| Radial [N] | 88 | 245 |
| Thrust [N] | 59 | 98 |
| Mass | Standard [kg] | 0.27 | 0.37 | 0.47 | 0.57 | 0.77 | 1.2 | 1.5 |
| With electromagnetic brake [kg] | 0.53 | 0.63 | 0.73 | 0.99 | 1.2 | 1.6 | 1.9 |
1. Contact your local sales office if the load to motor inertia ratio exceeds the value in the table.2. The shaft-through portion is excluded.3. The value in brackets is applicable when the torque is increased with a combination with a larger-capacity servo amplifier.4. The continuous running duty and the speed are not guaranteed when the power supply voltage is dropped.5. When unbalanced torque is generated, such as in a vertical lift machine, keep the unbalanced torque of the machine under 70 % of the servo motor rated torque.6. For the HK-KT053W with an oil seal, use 80 % of the rated output.7. When IP67 cables are required, please contact Mitsubishi Electric System & Service Co., Ltd. OVERSEAS SERVICE SECTION. (Email: osb.webmaster@ melsc.jp)8. 28 times or less for 6000 r/min or less.9. When the servo motor is combined with a 100 W servo amplifier, the recommended load to motor inertia ratio is for operating the servo motor at the rated speed.If operating the servo motor at a speed exceeding the rated speed, check the need for a regenerative option with the drive system sizing software Motorizer. A servo amplifier with a larger capacity can be combined.
| Model | HK-KT053WB | HK-KT13WB | HK-KT1M3WB | HK-KT13UWB | HK-KT23WB | HK-KT43WB | HK-KT63WB |
| Type | Spring actuated type safety brake |
| Rated voltage | 24 V DC 0 to -10 % |
| Power consumption [W] at 20 °C | 6.4 | 7.9 |
| Electromagnetic brake static friction torque [N•m] | 0.48 or higher | 1.9 or higher |
| Permissible braking work | Per braking [J] | 5.6 | 22 |
| Per hour [J] | 56 | 220 |
| Electromagnetic brake life 2 | Number of braking times | 20000 |
| Work per braking [J] | 5.6 | 22 |
1. The electromagnetic brake is for holding. It cannot be used for deceleration applications.2. Brake gap is not adjustable. Electromagnetic brake life is defined as the time period until readjustment is needed.
| Rotary servo motor model HK-KT | 23UW | 43UW | 7M3W | 103W | 7M3UW | 103UW | 153W | 203W | 202W |
| Flange size [mm] | 80 × 80 | 90 × 90 |
| Continuous running duty 4 | Rated output [kW] | 0.2 | 0.4 | 0.75 | 1.0 | 0.75 | 1.0 | 1.5 | 2.0 | 2.0 |
| Rated torque 5 [N•m] | 0.64 | 1.3 | 2.4 | 3.2 | 2.4 | 3.2 | 4.8 | 6.4 | 9.5 |
| Maximum torque 3 [N•m] | 1.9 (2.5) | 4.5 (5.7) | 8.4 (10.7) | 11.1 (14.3) | 8.4 (10.7) | 11.1 (14.3) | 16.7 (21.5) | 19.1 (25.5) | 28.6 (38.2) |
| Rated speed 4 [r/min] | 3000 | 2000 |
| Maximum speed 4 [r/min] | 6700 | 6500 | 6700 | 6000 | 5000 | 3000 |
| Power rate at continuous rated torque | Standard [kW/s] | 9.7 | 22.3 | 41.6 | 60.3 | 27.0 | 37.0 | 52.0 | 71.7 | 111 |
| With electromagnetic brake [kW/s] | 7.3 | 18.8 | 37.7 | 56.0 | 23.3 | 32.9 | 48.3 | 67.7 | 107 |
| Rated current [A] | 1.5 | 2.1 | 4.7 | 5.0 | 4.0 | 4.9 | 6.5 | 9.0 | 9.0 |
| Maximum current 3 [A] | 5.9 (9.0) | 9.2 (13) | 20 (26) | 21 (28) | 16 (22) | 21 (27) | 26 (34) | 30 (41) | 30 (41) |
| Moment of inertia J | Standard [× 10 -4 kg•m²] | 0.419 | 0.726 | 1.37 | 1.68 | 2.11 | 2.74 | 4.38 | 5.65 | 8.18 |
| With electromagnetic brake [× 10 -4 kg•m²] | 0.557 | 0.864 | 1.51 | 1.81 | 2.45 | 3.08 | 4.72 | 5.99 | 8.53 |
| Recommended load to motor inertia ratio 1 | 10 times or less | 16 times or less | 17 times or less | 10 times or less | 15 times or less |
| Speed/position detector | Batteryless absolute/incremental 26-bit encoder (resolution: 67,108,864 pulses/rev) |
| Oil seal | None (Servo motors with an oil seal are available. (HK-KT_J)) |
| Electromagnetic brake | None (Servo motors with an electromagnetic brake are available. (HK-KT_B)) |
| Thermistor | None |
| Insulation class | 155 (F) |
| Structure | Totally enclosed, natural cooling (IP rating: IP67) 2 6 |
| Vibration resistance *1 | X: 49 m/s² Y: 49 m/s² | X: 24.5 m/s² Y: 49 m/s² | X: 24.5 m/s² Y: 24.5 m/s² |
| Vibration rank | V10 *3 |
| Permissible load for the shaft *2 | L [mm] | 30 | 40 |
| Radial [N] | 245 | 392 |
| Thrust [N] | 98 | 147 |
| Mass | Standard [kg] | 1.2 | 1.5 | 2.2 | 2.4 | 2.3 | 2.7 | 3.6 | 4.4 | 5.9 |
| With electromagnetic brake [kg] | 1.9 | 2.2 | 2.9 | 3.1 | 3.4 | 3.8 | 4.7 | 5.5 | 7.0 |
1. Contact your local sales office if the load to motor inertia ratio exceeds the value in the table.2. The shaft-through portion is excluded.3. The value in brackets is applicable when the torque is increased with a combination with a larger-capacity servo amplifier.4. The continuous running duty and the speed are not guaranteed when the power supply voltage is dropped.5. When unbalanced torque is generated, such as in a vertical lift machine, keep the unbalanced torque of the machine under 70 % of the servo motor rated torque.6. When IP67 cables are required, please contact Mitsubishi Electric System & Service Co., Ltd. OVERSEAS SERVICE SECTION. (Email: osb.webmaster@ melsc.jp)
| Model | HK-KT23UWB | HK-KT43UWB | HK-KT7M3WB | HK-KT103WB | HK-KT7M3UWB | HK-KT103UWB | HK-KT153WB | HK-KT203WB | HK-KT202WB |
| Type | Spring actuated type safety brake |
| Rated voltage | 24 V DC 0 – -10 % |
| Power consumption [W] at 20 °C | 8.2 | 10 | 9.0 | 13.8 |
| Electromagnetic brake static friction torque [N•m] | 1.3 or higher | 3.2 or higher | 3.2 or higher | 9.5 or higher |
| Permissible braking work | Per braking [J] | 22 | 64 | 66 | 64 |
| Per hour [J] | 220 | 640 | 660 | 640 |
| Electromagnetic brake life 2 | Number of braking times | 20000 |
| Work per braking [J] | 22 | 64 | 33 | 64 |
1. The electromagnetic brake is for holding. It cannot be used for deceleration applications.2. Brake gap is not adjustable. Electromagnetic brake life is defined as the time period until readjustment is needed.
| Rotary servo motor model HK-KT | 434W | 634W | 7M34W | 1034W | 1534W | 2034W | 2024W |
| Flange size [mm] | 60 × 60 | 80 × 80 | 90 × 90 |
| Continuous running duty 4 | Rated output [kW] | 0.2 | 0.3 | 0.375 | 0.5 | 0.75 | 1.0 | 1.0 |
| Rated torque 5 [N•m] | 1.3 | 1.9 | 2.4 | 3.2 | 4.8 | 6.4 | 9.5 |
| Maximum torque 3 [N•m] | 4.5 (5.7) | 6.7 (8.6) | 8.4 (10.7) | 11.1 (14.3) | 21.5 | 25.5 | 38.2 |
| Rated speed 4 [r/min] | 1500 | 1000 |
| Maximum speed 4 [r/min] | 3500 | 3000 | 2500 | 1500 |
| Power rate at continuous rated torque | Standard [kW/s] | 39.5 | 61.0 | 41.6 | 60.3 | 52.0 | 71.7 | 111 |
| With electromagnetic brake [kW/s] | 36.7 | 58.0 | 37.7 | 56.0 | 48.3 | 67.7 | 107 |
| Rated current [A] | 1.3 | 2.3 | 2.4 | 2.5 | 3.3 | 4.5 | 4.5 |
| Maximum current 3 [A] | 4.9 (6.6) | 9.1 (13) | 9.7 (13) | 11 (14) | 17 | 21 | 21 |
| Moment of inertia J | Standard [× 10 -4 kg•m²] | 0.410 | 0.598 | 1.37 | 1.68 | 4.38 | 5.65 | 8.18 |
| With electromagnetic brake [× 10 -4 kg•m²] | 0.442 | 0.629 | 1.51 | 1.81 | 4.72 | 5.99 | 8.53 |
| Recommended load to motor inertia ratio 1 | 25 times or less | 17 times or less | 15 times or less |
| Speed/position detector | Batteryless absolute/incremental 26-bit encoder (resolution: 67,108,864 pulses/rev) |
| Oil seal | None (Servo motors with an oil seal are available. (HK-KT_J)) |
| Electromagnetic brake | None (Servo motors with an electromagnetic brake are available. (HK-KT_B)) |
| Thermistor | None |
| Insulation class | 155 (F) |
| Structure | Totally enclosed, natural cooling (IP rating: IP67) 2 6 |
| Vibration resistance *1 | X: 49 m/s² Y: 49 m/s² | X: 24.5 m/s² Y: 24.5 m/s² |
| Vibration rank | V10 *3 |
| Permissible load for the shaft *2 | L [mm] | 30 | 40 |
| Radial [N] | 245 | 392 |
| Thrust [N] | 98 | 147 |
| Mass | Standard [kg] | 1.2 | 1.5 | 2.2 | 2.4 | 3.6 | 4.4 | 5.9 |
| With electromagnetic brake [kg] | 1.6 | 1.9 | 2.9 | 3.1 | 4.7 | 5.5 | 7.0 |
1. Contact your local sales office if the load to motor inertia ratio exceeds the value in the table.2. The shaft-through portion is excluded.3. The value in brackets is applicable when the torque is increased with a combination with a larger-capacity servo amplifier.4. The continuous running duty and the speed are not guaranteed when the power supply voltage is dropped.5. When unbalanced torque is generated, such as in a vertical lift machine, keep the unbalanced torque of the machine under 70 % of the servo motor rated torque.6. When IP67 cables are required, please contact Mitsubishi Electric System & Service Co., Ltd. OVERSEAS SERVICE SECTION. (Email: osb.webmaster@ melsc.jp)
| Model | HK-KT434WB | HK-KT634WB | HK-KT7M34WB | HK-KT1034WB | HK-KT1534WB | HK-KT2034WB | HK-KT2024WB |
| Type | Spring actuated type safety brake |
| Rated voltage | 24 V DC 0 to -10 % |
| Power consumption [W] at 20 °C | 7.9 | 10 | 13.8 |
| Electromagnetic brake static friction torque [N•m] | 1.9 or higher | 3.2 or higher | 9.5 or higher |
| Permissible braking work | Per braking [J] | 22 | 64 | 64 |
| Per hour [J] | 220 | 640 | 640 |
| Electromagnetic brake life 2 | Number of braking times | 20000 |
| Work per braking [J] | 22 | 64 | 64 |
1. The electromagnetic brake is for holding. It cannot be used for deceleration applications.2. Brake gap is not adjustable. Electromagnetic brake life is defined as the time period until readjustment is needed.
| Rotary servo motor model HK-ST | 52W | 102W | 172W | 202AW | 302W | 202W | 352W |
| Flange size [mm] | 130 × 130 | 176 × 176 |
| Continuous running duty 4 | Rated output [kW] | 0.5 | 1.0 | 1.75 | 2.0 | 3.0 | 2.0 | 3.5 |
| Rated torque 3 5 [N•m] | 2.4 (3.2) | 4.8 (6.4) | 8.4 | 9.5 (11.6) | 14.3 | 9.5 (12.7) | 16.7 |
| Maximum torque 3 [N•m] | 7.2 (12.7) | 14.3 (19.1) | 25.1 | 28.6 (34.7) | 43.0 | 28.6 (38.2) | 50.1 |
| Rated speed 3 4 [r/min] | 2000 (1500) | 2000 (1500) | 2000 | 2000 (1650) | 2000 | 2000 (1500) | 2000 |
| Maximum speed 4 [r/min] | 4000 | 2500 | 4000 | 3500 |
| Power rate at continuous rated torque 3 | Standard [kW/s] | 9.7 (17.2) | 26.3 (46.8) | 61.2 | 53.9 (79.2) | 91.5 | 25.1 (44.6) | 52.1 |
| With electromagnetic brake [kW/s] | 7.0 (12.4) | 20.9 (37.2) | 51.1 | 47.8 (70.3) | 83.6 | 22.0 (39.2) | 47.7 |
| Rated current 3 [A] | 3.0 (4.0) | 5.3 (7.0) | 9.3 | 11 (13) | 11 | 10 (14) | 16 |
| Maximum current 3 [A] | 11 (19) | 18 (24) | 32 | 34 (42) | 34 | 32 (45) | 52 |
| Moment of inertia J | Standard [× 10 -4 kg•m²] | 5.90 | 8.65 | 11.4 | 16.9 | 22.4 | 36.4 | 53.6 |
| With electromagnetic brake [× 10 -4 kg•m²] | 8.15 | 10.9 | 13.7 | 19.1 | 24.5 | 41.4 | 58.6 |
| Recommended load to motor inertia ratio 1 | 15 times or less 6 | 23 times or less | 24 times or less | 15 times or less 7 | 12 times or less 8 |
| Speed/position detector | Batteryless absolute/incremental 26-bit encoder (resolution: 67,108,864 pulses/rev) |
| Oil seal | None (Servo motors with an oil seal are available. (HK-ST_J)) |
| Electromagnetic brake | None (Servo motors with an electromagnetic brake are available. (HK-ST_B)) |
| Thermistor | None |
| Insulation class | 155 (F) |
| Structure | Totally enclosed, natural cooling (IP rating: IP67) 2 |
| Vibration resistance *1 | X: 24.5 m/s² Y: 49 m/s² |
| Vibration rank | V10 *3 |
| Permissible load for the shaft *2 | L [mm] | 55 | 79 |
| Radial [N] | 980 | 2058 |
| Thrust [N] | 490 | 980 |
| Mass | Standard [kg] | 4.3 | 5.2 | 6.2 | 8.0 | 9.8 | 12 | 15 |
| With electromagnetic brake [kg] | 6.0 | 6.9 | 7.8 | 10 | 12 | 17 | 20 |
1. Contact your local sales office if the load to motor inertia ratio exceeds the value in the table.2. The shaft-through portion is excluded.3. The value in brackets is applicable when the torque is increased with a combination with a larger-capacity servo amplifier.4. The continuous running duty and the speed are not guaranteed when the power supply voltage is dropped.5. When unbalanced torque is generated, such as in a vertical lift machine, keep the unbalanced torque of the machine under 70 % of the servo motor rated torque.6. 19 times or less for 3000 r/min or less.7. 20 times or less for 3000 r/min or less.8. 22 times or less for 3000 r/min or less.
| Model | HK-ST52WB | HK-ST 02WB | HK-ST172WB | HK-ST202AWB | HK-ST302WB | HK-ST202WB | HK-ST352WB |
| Type | Spring actuated type safety brake |
| Rated voltage | 24 V DC 0 to -10 % |
| Power consumption [W] at 20 °C | 20 | 23 | 34 |
| Electromagnetic brake static friction torque [N•m] | 8.5 or higher | 16 or higher | 44 or higher |
| Permissible braking work | Per braking [J] | 400 | 400 | 4500 |
| Per hour [J] | 4000 | 4000 | 45000 |
| Electromagnetic brake life 2 | Number of braking times | 20000 | 5000 | 20000 |
| Work per braking [J] | 200 | 400 | 1000 |
1. The electromagnetic brake is for holding. It cannot be used for deceleration applications.2. Brake gap is not adjustable. Electromagnetic brake life is defined as the time period until readjustment is needed.
| Rotary servo motor model HK-ST | 524W | 1024W | 1724W | 2024AW | 3024W | 2024W | 3524W | 5024W |
| Flange size [mm] | 130 × 130 | 176 × 176 |
| Continuous running duty 4 | Rated output [kW] | 0.3 | 0.6 | 0.85 | 1.0 | 1.5 | 1.2 | 2.0 | 3.0 |
| Rated torque 5 [N•m] | 2.9 | 5.7 | 8.1 | 9.5 | 14.3 | 11.5 | 19.1 | 28.6 |
| Maximum torque 3 [N•m] | 11.5 | 17.2 (20.1) | 24.4 | 33.4 | 43.0 | 40.1 | 57.3 (66.8) | 85.9 |
| Rated speed 4 [r/min] | 1000 |
| Maximum speed 4 [r/min] | 2000 | 1200 | 2000 | 1500 | 2000 |
| Power rate at continuous rated torque | Standard [kW/s] | 13.9 | 37.9 | 57.8 | 53.9 | 91.5 | 36.1 | 68.0 | 116 |
| With electromagnetic brake [kW/s] | 10.1 | 30.1 | 48.3 | 47.8 | 83.6 | 31.7 | 62.3 | 108 |
| Rated current [A] | 1.8 | 3.2 | 4.5 | 5.2 | 5.1 | 6.0 | 9.0 | 16 |
| Maximum current 3 [A] | 8.3 | 11 (13) | 17 | 20 | 17 | 24 | 32 (37) | 52 |
| Moment of inertia J | Standard [× 10 -4 kg•m²] | 5.90 | 8.65 | 11.4 | 16.9 | 22.4 | 36.4 | 53.6 | 70.8 |
| With electromagnetic brake [× 10 -4 kg•m²] | 8.15 | 10.9 | 13.7 | 19.1 | 24.5 | 41.4 | 58.6 | 75.8 |
| Recommended load to motor inertia ratio 1 | 15 times or less | 24 times or less | 20 times or less | 24 times or less | 23 times or less |
| Speed/position detector | Batteryless absolute/incremental 26-bit encoder (resolution: 67,108,864 pulses/rev) |
| Oil seal | None (Servo motors with an oil seal are available. (HK-ST_J)) |
| Electromagnetic brake | None (Servo motors with an electromagnetic brake are available. (HK-ST_B)) |
| Thermistor | None |
| Insulation class | 155 (F) |
| Structure | Totally enclosed, natural cooling (IP rating: IP67) 2 |
| Vibration resistance *1 | X: 24.5 m/s² Y: 49 m/s² | X: 24.5 m/s² Y: 29.4 m/s² |
| Vibration rank | V10 *3 |
| Permissible load for the shaft *2 | L [mm] | 55 | 79 |
| Radial [N] | 980 | 2058 |
| Thrust [N] | 490 | 980 |
| Mass | Standard [kg] | 4.3 | 5.2 | 6.2 | 8.0 | 9.8 | 12 | 15 | 18 |
| With electromagnetic brake [kg] | 6.0 | 6.9 | 7.8 | 10 | 12 | 17 | 20 | 23 |
1. Contact your local sales office if the load to motor inertia ratio exceeds the value in the table.2. The shaft-through portion is excluded.3. The value in brackets is applicable when the torque is increased with a combination with a larger-capacity servo amplifier.4. The continuous running duty and the speed are not guaranteed when the power supply voltage is dropped.5. When unbalanced torque is generated, such as in a vertical lift machine, keep the unbalanced torque of the machine under 70 % of the servo motor rated torque.
| Model | HK-ST524WB | HK-ST1024WB | HK-ST1724WB | HK-ST2024AWB | HK-ST3024WB | HK-ST2024WB | HK-ST3524WB | HK-ST5024WB |
| Type | Spring actuated type safety brake |
| Rated voltage | 24 V DC 0 to -10 % |
| Power consumption [W] at 20 °C | 20 | 23 | 34 |
| Electromagnetic brake static friction torque [N•m] | 8.5 or higher | 16 or higher | 44 or higher |
| Permissible braking work | Per braking [J] | 400 | 400 | 4500 |
| Per hour [J] | 4000 | 4000 | 45000 |
| Electromagnetic brake life 2 | Number of braking times | 20000 | 5000 | 20000 |
| Work per braking [J] | 200 | 400 | 1000 |
1. The electromagnetic brake is for holding. It cannot be used for deceleration applications.2. Brake gap is not adjustable. Electromagnetic brake life is defined as the time period until readjustment is needed.
